ZKM6041/ZKM6043/ZKM6044

Product name: ZKM6041/ZKM6043/ZKM6044

Listing Date: 2019-05-27

installation

?? Take the dual-channel (2 in 2 out) product installation as an example. The 1st, 1st, 1st, 2nd, 2nd and 2nd products are all in the same installation form.

?? Installed in a safe place and meets the environmental conditions required by the instrument specifications.

?? Can be snapped onto a standard 35mm DIN rail (see Figure 2). The guide rails shall conform to the dimensional specifications of the TH35-7.5 guide rails in the national standard GB/T19334-2003. This standard is equivalent to the international standard of the International Electrotechnical Commission IEC60715-1981.

?? The installation must be stable and secure. It is recommended to use a rail plug to prevent the meter from sliding on the rail and installing it unstable. Can be installed intensively.

■ Method of mounting on the rail (see Figure 3, mounted on the DIN rail)

1 Hook the upper end of the instrument mounting bayonet on a standard DIN rail;

2 Push the meter in the direction of the guide rail so that the mounting bayonet of the meter is completely fitted on the DIN rail;

3 Press the mounting lock card to lock the DIN rail.

■ How to remove from the rail (see Figure 4, disassembly diagram)

1 Insert the installation lock card of the instrument with a flat head screwdriver (knife width ≤ 3mm);

2 Slightly force the installation of the locking card to make the installation locking card of the instrument out of the DIN rail;

3 Take the meter out of the rail.

Overview
Features
Use environment

■ Thank you for choosing our products. Before using, please check your package contents, which should include the following sections:

■ Built-in: Isolation distributor

■ Model: Check that the product label or the model number printed on the product case is the one you ordered.

■ User's Guide: Describes some simple precautions for using this product, such as installation, connection, and simple maintenance.

■ If you have any questions or concerns about our products, please contact your sales department or agent.

■ For your convenience and full understanding and proper use of this product, please read this instruction manual carefully.

See the attachment for details:

ZKM6041/ZKM6043/ZKM6044 ZKM-60XX系列详细参数.docx

Precautions

■Rated input voltage and range

◆ This instrument (isolator) is powered by 24VDC power supply. It is strictly forbidden to use 220V AC power.

◆ Find the rated input voltage marked on the product and verify that its range matches the following:

◆ Power supply voltage range: 20~30VDC.

◆ Rated power supply voltage: 24VDC

◆ Maximum current consumption: <48mA (1 input and 1 output); <60mA (1 input and 2 output); <90mA (2 input and 2 output)

■Working environment

◆ For indoor use only, install this instrument in a safe place.

◆ The instrument is protected to IP20 (IEC 60529 / EN 60529) and is suitable for use in a clean, dry environment.

Used internally.

◆ The ambient temperature is -20~60°C (continuous operation), and the relative humidity is 5~95% RH (no condensation) to ensure the instrument has sufficient service life.

■General safety measures

◆ When you install or remove the meter, turn off the power and disconnect the signal to ensure safety.

◆ Do not apply a load to the meter that exceeds its design capabilities.

◆ It is strictly forbidden to disassemble the instrument or change the circuit device to prevent the instrument from failing or malfunctioning.

◆ If there is instrument damage, improper load or malfunction, stop the instrument and immediately withdraw it.

■ Wiring

◆ The wiring cable of the instrument should be away from electromagnetic interference sources (for example: relay drive cable, high frequency line, etc.).

◆ The wiring cable and the electromagnetic interference source cannot be installed in the same pipe.

◆ The wiring cable is a single-core or multi-core cable with a section of 0.5~2.5mm2. The insulation strength of the wiring cable should be greater than 500V.

installation

?? Take the dual-channel (2 in 2 out) product installation as an example. The 1st, 1st, 1st, 2nd, 2nd and 2nd products are all in the same installation form.

?? Installed in a safe place and meets the environmental conditions required by the instrument specifications.

?? The installation must be stable and secure. It is recommended to use a rail plug to prevent the meter from sliding on the rail and installing it unstable. Can be installed intensively.

■ Method of mounting on the rail (see Figure 3, mounted on the DIN rail)

1 Hook the upper end of the instrument mounting bayonet on a standard DIN rail;

2 Push the meter in the direction of the guide rail so that the mounting bayonet of the meter is completely fitted on the DIN rail;

3 Press the mounting lock card to lock the DIN rail.

■ How to remove from the rail (see Figure 4, disassembly diagram)

1 Insert the installation lock card of the instrument with a flat head screwdriver (knife width ≤ 3mm);

2 Slightly force the installation of the locking card to make the installation locking card of the instrument out of the DIN rail;

3 Take the meter out of the rail.

Hot Products / Related Products More

KYN28A-12 AC Metal Closed Switch Ingres

2019 - 03 - 19

KYN28A -12 AC metal closed switching equipment (hereinafter referred to as switch cabinet) is a three-phase AC 50Hz, rated voltage 12kV single bus and bus segmented system in-house power distribution device. It is suitable for power supply systems in-house such as power plants, substations and airports, terminals, factories and mining enterprises, hotels, financial high-rises and civil buildings, ...

MNS low-pressure extraction switch cabinet

2019 - 03 - 19

MNS low-pressure extraction switching cabinet for the recent development of new products. Its technical level reached the international advanced level in the 1990s. This product design is compact, the structure is strong, the assembly is flexible, the use of standard module design, is a safe, economical, reasonable and reliable new low-voltage extraction switch cabinet. Products with high scoring ...

GCK low-voltage switching equipment

2019 - 03 - 19

GCK type low voltage set switching equipment (hereinafter referred to as device) is suitable for AC 50Hz, rated operating voltage of 400V, rated current is 4000A and below the low voltage grid, for power generation, transmission, power distribution system as a power lighting, power conversion, protection control and other occasions.The unit passes the all-type test project (TTA) and the national m...

GGD low-voltage switching equipment

2019 - 03 - 19

GGD low voltage set switching equipment (hereinafter referred to as device) is suitable for power plant, substation, plant and mining enterprises and other power users of the EXCHANGE 50Hz, rated operating voltage 400V, rated operating current to 3200A distribution system, as power conversion, distribution and control of power, lighting and distribution equipment.The device conforms to GB7251.1 st...

ZKM6041/ZKM6043/ZKM6044

SKYPE 设置

阿里旺旺设置

等待加载动态数据...

电话号码管理

QQ设置

二维码管理

等待加载动态数据...