ZJHM series pneumatic film sleeve regulating valve

Product name: ZJHM series pneumatic film sleeve regulating valve

Listing Date: 2019-05-28

Overview
Features
Use environment

The ZJHM series pneumatic diaphragm sleeve control valve is a pressure balanced regulator. Equipped with a multi-spring actuator, the overall structure is compact, heavy and light, and stable. The fluid channel has a 3-stream type and low pressure drop loss, allowing for large pressure difference, low noise, and large circulation capacity. Widely used in precise control of gas, liquid and other media process parameters such as: pressure, flow, temperature, liquid level maintained at a given value. It is especially suitable for occasions where the flow rate is large, the pressure difference is large, and the leakage amount is not high.

This series of products are available in standard and adjustable cut-off type, bellows seal type, and jacket insulation type. The product's nominal pressure grade has households ~10, 16, 40, 64. The valve body diameter ranges from DN20 to 500, and the applicable fluid temperature ranges from -196 °C to +560 °C, and its range is various. The leakage standards are Class IV, Class V and Class VI. The flow characteristics are linear or equal percentage. A variety of varieties and specifications are available.

1. Adopting balanced valve core structure, the axial unbalance force is small, allowing large pressure difference and good stability. The sleeve has good interchangeability, convenient assembly and disassembly, and easy maintenance.

2. The full metal valve core structure is suitable for a variety of working situations, meeting the Class IV leakage standard, and the soft seal structure valve core meets the Class VI leakage standard.

3. The valve body is designed according to the principle of fluid mechanics as a low flow resistance flow path with equal surface, the adjustable range is large, the inherent adjustable ratio is 50:1, and the rated flow coefficient is increased by 30%.

4. The actuator adopts a multi-spring structure with a height reduction of 307%. Weight reduction of 30%.

5. ZJHMW type bellows seal regulating valve forms a complete seal on the moving valve stem to block the leakage of fluid.

Valve body bonnet

ZG230-450, ZG0Cr18Ni9

Spool seat

0Cr18Ni9, 0Cr18Ni9+PTFE, 0Cr18Ni9+ Stacey

filler

PTFE, flexible graphite

Bellows

0Cr18Ni9

Gasket

Graphite wound gasket (V6590), toothed gasket

Membrane cover

A3, 0Cr18Ni9

Corrugated diaphragm

Clip reinforced nylon fabric nitrile rubber

spring

60Si2Mn

Stem stem

0Cr18Ni9, 2cr13

Hot Products / Related Products More

KYN28A-12 AC Metal Closed Switch Ingres

2019 - 03 - 19

KYN28A -12 AC metal closed switching equipment (hereinafter referred to as switch cabinet) is a three-phase AC 50Hz, rated voltage 12kV single bus and bus segmented system in-house power distribution device. It is suitable for power supply systems in-house such as power plants, substations and airports, terminals, factories and mining enterprises, hotels, financial high-rises and civil buildings, ...

MNS low-pressure extraction switch cabinet

2019 - 03 - 19

MNS low-pressure extraction switching cabinet for the recent development of new products. Its technical level reached the international advanced level in the 1990s. This product design is compact, the structure is strong, the assembly is flexible, the use of standard module design, is a safe, economical, reasonable and reliable new low-voltage extraction switch cabinet. Products with high scoring ...

GCK low-voltage switching equipment

2019 - 03 - 19

GCK type low voltage set switching equipment (hereinafter referred to as device) is suitable for AC 50Hz, rated operating voltage of 400V, rated current is 4000A and below the low voltage grid, for power generation, transmission, power distribution system as a power lighting, power conversion, protection control and other occasions.The unit passes the all-type test project (TTA) and the national m...

GGD low-voltage switching equipment

2019 - 03 - 19

GGD low voltage set switching equipment (hereinafter referred to as device) is suitable for power plant, substation, plant and mining enterprises and other power users of the EXCHANGE 50Hz, rated operating voltage 400V, rated operating current to 3200A distribution system, as power conversion, distribution and control of power, lighting and distribution equipment.The device conforms to GB7251.1 st...

ZJHM series pneumatic film sleeve regulating valve

SKYPE 设置

阿里旺旺设置

等待加载动态数据...

电话号码管理

QQ设置

二维码管理

等待加载动态数据...