1, the power bar flow probe using the warhead cross-section shape, high-strength single-chamber double-cavity leakage-proof structure, the front surface rough treatment, increase the anti-silt tank and low pressure extraction hole position on both sides, positive and negative pressure extraction pressure hole using a multi-group design, the fluid pass by the least traction, and the fluid and probe separation point fixed, so that the flow time is stable.

2, the pipe permanent pressure loss is small, the shape of the cross-section of the power bar produces the least negative force, so the permanent pressure loss of the fluid is the lowest, generally only the differential pressure of 3, compared with the plate, nozzle, venturi, energy consumption is reduced by more than 95.

3, installation is simple, light weight power bar flow probe for hollow metal probe, in addition to the form structure with the cut-off valve is more complex, the rest of the components are lead pipe, fittings and other small components. The installation of the Powerbar only needs to be drilled at the installation point for simple welding, the installation is independent of the diameter size of the pipe diameter.

4, the measurement range application of a wide-power bar flow sensor can measure a variety of gases (air, gas, natural gas, etc.), steam, liquid (chemical liquid sofone solution, etc.) and a single flow medium

Technical indicators

1. Range ratio 20:1

2. Universal pipe diameter: 40mm to 12000mm;

3. Measurement accuracy: .1.0%;

4. Repetition accuracy: .1%;

5. Work pressure: 0 to 40Mpa;

6. Operating temperature: -100 C to 800 degrees C;

7. Suitable media: air, gas, flue gas, natural gas, tap water, boiler water supply, perishable solution; saturated steam, superheated steam, etc.

8. Connection: Plug-in flange connection, thread connection, pipe flange connection